Chelsio Communications N210 Bedienungsanleitung PDF herunterladen (Seite 8)

Device Driver Parameters

This section describes how to configure the Chelsio N210/N110 10Gb Ethernet adapter driver.

Configuring the driver parameters is the same between SPARC and x86 machines running

Solaris 10.

The chxge driver controls the Chelsio N110 and N210 Ethernet adapters. The chxge driver has a

PCI vendor ID of pci1425 and device ID’s of 0007 and 000a for the N110 and N210,

respectively.

Driver Configuration

Table 1: Driver parameters and descriptions

Driver Parameter Values Description

pci-burstsize

512

1024

2048

PCI Burst Size

= use system default

= 512 bytes

= 1024 bytes

= 2048 bytes

pci-split-transaction-cnt

PCI Split Transactions

= use system default

= 1 transaction

= 2 transactions

= 3 transactions

= 4 transactions

= 8 transactions

= 12 transactions

= 16 transactions

= 32 transactions

amd-bug-workaround

Workaround for the AMD-8131

PCI-X HyperTransport Tunnel

chipset.

= disabled

= enabled (default)

enable-latency-timer

PCI Latency Timer

= use system default

= set timer to 0xF8

accept-jumbo

Jumbo Frames

= disabled (default)

= enabled

enable-checksum-offload

Hardware Checksum Offload

= disabled

= enabled (default)

Chelsio N210/N110 Installation and User Guide for Solaris Release 10, April 2005. 5

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Chelsio Communications N210 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern