Chelsio Communications Chelsio T4 Betriebsanweisung PDF herunterladen (Seite 153)

100

101

Chapter IX. FCoE Full Offload Initiator

ii. To check the list of targets discovered from a particular FCoE port, first find out the wwpn of

the initiator local port under sysfs. The hosts under fc_host depends on the number of ports

on the adapter used.

[root@host]# cat /sys/class/fc_host/hostX/port_name

iii. After finding the localport, go to the corresponding Remote port under sysfs # cat

/sys/class/fc_remote_ports/rport-X:B:R where X is the Host ID, B is the bus ID and R is

the remote port.

Alternatively the locaports can also be found using cxgbtool

[root@host]# cxgbtool stor –a <adapter no> --show-lnode

After finding out the wwpn of the local node, to verify the list of targets being discovered, use the

following command.

[root@host]# cxgbtool stor –a <adapter_no> --show-rnode --wwn=<wwpn of

lnode>

R can correspond to NameServer, Management Server and other initiator ports

logged in to the switch and targets.

Note

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 373 374

Kommentare zu diesen Handbüchern

Keine Kommentare

Chelsio Communications Chelsio T4 Betriebsanweisung Seite 153

Kommentare zu diesen Handbüchern