
Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire For Linux Page 32
To build and install drivers along with benchmarks,
[root@host]# make BENCHMARKS=1
[root@host]# make BENCHMARKS=1 install
3.3. Installing Chelsio Unified Wire from RPM
3.3.1. Menu Mode
i. Download the tarball specific to your operating system and architecture from Chelsio
Download Center, http://service.chelsio.com/
ii. Untar the tarball:
E.g. For RHEL 6.4, untar using the following command:
[root@host]# tar -zxvfm ChelsioUwire-x.xx.x.x-RHEL6.4_x86_64.tar.gz
iii. Change your current working directory to Chelsio Unified Wire package directory and run
the following command:
[root@host]# ./install.py
iv. Select the required T5/T4 configuration tuning option as described below. Enter the
corresponding number in the Input field and press Enter.
v. Next press 1 if you want to install OFED along with the configuration tuning option selected
in step (vi) or 2 to skip OFED installation. Press Enter to continue with your choice.
vi. Select the Installation type as described below. Enter the corresponding number in the Input
field and press Enter.
1. Install all Chelsio drivers: Install all the drivers provided in the Unified Wire
package.
2. Install NIC and TOE drivers: Install only the Network and TOE drivers.
3. Install bypass drivers and tools: Install only the bypass drivers and tools.
4. Install WD drivers and library: Install only Wire Direct drivers and libraries.
5. EXIT: Exit the installer.
To view the different configuration tuning options, view the help by typing
[root@host]#make help
If IPv6 is administratively disabled in the machine, by default the drivers will be
built and installed without IPv6 Offload support.
Kommentare zu diesen Handbüchern